HowStuffWorks “Bus Speed”
Bus Speed
A bus is simply a circuit that connects one part of the motherboard to another. The more data a bus can handle at one time, the faster it allows information to travel. The speed of the bus, measured in megahertz (MHz), refers to how much data can move across the bus simultaneously.
Bus speed usually refers to the speed of the front side bus (FSB), which connects the CPU to the northbridge. FSB speeds can range from 66 MHz to over 800 MHz. Since the CPU reaches the memory controller though the northbridge, FSB speed can dramatically affect a computer’s performance.
Here are some of the other busses found on a motherboard:
- The back side bus connects the CPU with the level 2 (L2) cache, also known as secondary or external cache. The processor determines the speed of the back side bus.
- The memory bus connects the northbridge to the memory.
- The IDE or ATA bus connects the southbridge to the disk drives.
- The AGP bus connects the video card to the memory and the CPU. The speed of the AGP bus is usually 66 MHz.
- The PCI bus connects PCI slots to the southbridge. On most systems, the speed of the PCI bus is 33 MHz. Also compatible with PCI is PCI Express, which is much faster than PCI but is still compatible with current software and operating systems. PCI Express is likely to replace both PCI and AGP busses.
The faster a computer’s bus speed, the faster it will operate — to a point. A fast bus speed cannot make up for a slow processor or chipset.
Now let’s look at memory and how it affects the motherboard’s speed.
Incoming search terms for the article:
Similar articles
- Front-side bus
From Wikipedia, the free encyclopedia This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (June 2008) In personal computers, the front-side bus (FSB) is the bus that carries data between the CPU and the northbridge. Depending on
... - What is a computer bus?
Introduction to the concept of a bus A bus, in computing, is a set of physical connections (cables, printed circuits, etc.) which can be shared by multiple hardware components in order to communicate with one another. The purpose of buses is to reduce the number of “pathways” needed for communication between the components, by
... - How computer RAM works?
Similar to a microprocessor, a memory chip is an integrated circuit (IC) made of millions of transistors and capacitors. In the most common form of computer memory, dynamic random access memory (DRAM), a transistor and a capacitor are paired to create a memory cell, which represents a single bit of data. The
... - Understanding PC Buses
Think of a bus as the electronic highway on which data travels within a computer, from one component to another. Basically, it’s the conduit used by your entire system to communicate with your CPU. A bus is a collection of wires and connectors through which the data is transmitted. When used in reference
... - Wanting to speed up my desktop
Easy Upgrade by bowacl – 9/1/06 7:10 PM In reply to: These sound like some good ideas! by tech_fantatic I must say I have added ram to quite of few Compaqs in and around this model – I do 512 ram total mainly but 512 sticks are just as cheap now as the 256 I used
...